Tristate Machinery Dismantlers Forum > ILLINOIS
> CA1240 casil 12V 4AH alarm system battery 12 volt sla
CA1240 casil 12V 4AH alarm system battery 12 volt sla
Brand New and Fresh 12v / 4Ah Battery
- Dimension: 90mm(L) x 70mm(W) x 101mm(H) x 107mm(TH) - 3.54"(L) x 2.76"(W) x 3.98"mm(H) x 4.21"(TH)
- Terminal Type : Faston-F1 (0.187"x0.032") Quick Disconnect Tabs
- 1 Year Replacement Warranty for Standby Application
Sealed Lead Acid Rechargeable Batteries
Our sealed lead acid batteries maintain the highest level ISO 9001-2000 certification. UL and CE approval is also granted for our high performance batteries. These rechargeable batteries feature a leak-proof design that helps ensure operational safety, and a relief valve in case of excessive gas pressure which doubles as a safety device in case of excessive overcharge. To maintain its high quality, our batteries undergo comprehensive rigorous testing at every manufacturing stage - capacity, high-load, shelf-life, vibration, overcharge, relief, valve, and cycle life. Scroll down to learn more about the benefits of our SLA Rechargeable batteries.
Ten Reasons to Choose Our Sealed Lead Acid Batteries
The valve regulated, spill-proof construction of our battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".
The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery: they are readily available and low in cost.
Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200 and 1000 charge/discharge cycles depending on the average depth of discharge.
Batteries may be used in series and/or parallel to obtain choice of voltage and capacity. Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications. Over 50 models are available to choose from.
The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.
Our batteries use state of the art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density provides superior power/volume and power/weight ratios.
Low internal resistance allows discharge currents of up to ten times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.
A low self-discharge rate may allow storage of fully charged batteries for up to a year at room temperature before charging is required. Lower storage temperatures enhance shelf life characteristics even further.
Wide Operating Temperature Range
Our batteries may be discharged over a temperature range of -40 C to +60 C (-40 F to +140 F), and charged at temperatures ranging from -20 C to +50 C (4 F to +122 F).
Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability of recovering from excessively deep discharge.
