Tristate Machinery Dismantlers Forum > INDIANA
> Lot apogee robotics agv automated guided vehicle parts
Lot apogee robotics agv automated guided vehicle parts
Lot Apogee Robotics AGV Automated Guided Vehicle Parts!
* 97 Piece Lot Apogee Robotics AGV Automated Guided Vehicle Parts
* Recovered from a factory repair facility, removed from their parts shelves. Sold as found in the boxes. See pictures. Used parts are in unknown condition unless otherwise noted below.
* (4) SK7254 general purpose rectifier, new
* (4) Bourns 3852A-282-103A 10K potentiometers for MCD pendants, new
* (1) Apogee 2205-0003 plastic gear, new
* (12) contact bars & contacts from contactors, used
* (1) packet of resistors, mixed new and used
* (1) ACC-10 circuit board #4, drive reference, used
* (39) Phoenix Contact plastic bars with tabs marked 0, 3, 4, and 6 down each one, new
* (1) bag marked 0229-0008 with a pile of small black and some small green parts
* (4) plastic mounts, they look new
* (1) Bourns 3545S-001-103 10k potentiometer, new
* (6) assorted cables, mixed new and used
* (3) antenna, used, 2 tagged "good" and have longer leads
* (11) assorted connectors, mixed new and used
* (1) Apogee 1710-0013, rev.D, I/O board, tagged bad #"O" relay
* (1) Apogee 1710-0013, rev.D, I/O board, looks new in the bag
* (1) terminal block with flat cable attached, used
* (1) Apogee 1710-0025 board, used
* (1) Cutler Hammer C350BA21 series A1 fuse block part, new
* (1) lot of miscellaneous parts