Tristate Machinery Dismantlers Forum > INDIANA
> Southbend 400, 15" x 40" geared head engine lathe, dro
Southbend 400, 15" x 40" geared head engine lathe, dro
If you can use a real nice 15" X 40" Engine Lathe, that is well tooled, take a real good look at this beauty. This lathe is a real sweetheart. No repaint here. That paint is original
We hooked this machine up after it was received and ran it through it's paces. It runs great and everything works as it should. We even used it to turn a couple of armatures with a tolerance of +/- .0005". No problem!
Just purchased from a small toolroom. This is a real nice 15" X 40" Geared Head Engine Lathe. We've done nothing but wipe it off. It is as it came to us, in great shape except for some very light scratching on the ways (see photo's).
SWI Model Trak 102 (Made For Lathes) Digitol Read Out (DRO), Hard Chrome Ground Ways, Inch & Metric Threading, 10" 3 Jaw Chuck, Aloris Tool Post and (4) Tool Holders, Thread Dial, Foot Brake, Coolant Chip Pan and Built-In Coolant Pump, Splash Guard, and Chuck Guard.
Actual swing over ways 15 1/2"
Actual swing over cross slide 10 1/8"
Spindle speeds (12) 62 RPM to 1,600 RPM
Spindle nose D-1-6 Camlock, 2 1/4" Through Hole
Overall Dimensions 90" L-R X 40" F-B X 50" High
We know the new owner of this Southbend 400 will be very happy with it.
You will never receive a second chance offer initiated by us on any item that has been listed with U$AVE2 as the seller.
Inform them that they will pick up your machine at Machine Tools of America s warehouse at 515 Kercher St., Miamisburg, OH 45342. The Southbend 400 Engine Lathe will weigh approx. 3,200# and occupy 8' of bed space. Further, inform them it needs to be tarped.
