Tristate Machinery Dismantlers Forum > WISCONSIN
> Cooper lighting fbp-1-40X emergency ballast
Cooper lighting fbp-1-40X emergency ballast
Cooper Lighting FBP-1-40X Emergency Ballast
For use with most 17W through 40W single pin or bipin fluorescent lamps. Operates one T8, T10, or T12 lamp in the emergency mode for a minumum of 90 minutes.
* The emergency ballast and AC ballast must be fed from the same branch circuit. See installation instructions for wiring diagrams.
* For use in Listed indoor fixtures EXCEPT air handing heated air outlets, and wet, damp , or hazardous location fixtures.
To prevent high voltage from present on red & yellow output leads, battery connector must be open. Do not join the battery connector until installation is complete and AC power is supplied to the emergency ballast.
This is a sealed unit, Integral battery is not replaceable. Replace entire unit when necessary.
* Battery 2.4V, 12Wh, charging current 390mA, recharging time 24hrs.
