Tristate Machinery Dismantlers Forum   >   INDIANA   >   4-3" X100' rolls/case roofing seaming tape

4-3" X100' rolls/case roofing seaming tape


All lap joints: shall be sealed using RUBBER TO RUBBER TAPE. All lap joints shall be shingled to shed water toward the drains, scuppers, etc.
Contact surfaces for the RUBBER TO RUBBER TAPE shall be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply Anjon primer to surfaces before applying seam tape.
The RUBBER TO RUBBER TAPE shall be securely bonded to the bottom deck sheet along the previously mark proper edge alignment of the seam tape on the bottom sheet. The top sheet shall then be lapped onto the lower sheet. The release paper shall be carefully removed without disturbing the placement of either sheet.
This 4 -3" x 100' rolls (case) is 20bs and is
B. SELF VULCANIZING LAP JOINTS



4-3