Tristate Machinery Dismantlers Forum > INDIANA
> Electrical Components
> Cdm-t 70W/830 philips lamp G12
Cdm-t 70W/830 philips lamp G12
Superior color stability over life within +- 200K.
Lamp to lamp color consistency over life.
Higher lumen maintenance than standard metal halide.
Warm (3K) or fresh white (4K) color impression.
High lamp efficacy (up to 93 lumens per watt) for energy saving and low heat.
Universal operating position.
Compact lamp dimensions for high beam intensities.
FadeBlock for reduced fading risks.
No shut off required in 24-hour-a-day/7-day-a-week operations (relamp fixtures at or before the end of rated life).
Long lamp life compared to incandescent and halogen lamps.
Accent and General lighting in retail, offices and public buildings. Decorative outdoor: floodlighting and pedestrian areas.
Requires a ballast specified or approved for Philips Metal Halide lamp or one designed to the indicated ANSI Standard. A pulse ignitor is
required. Sockets and wiring must withstand starting pulse. (391)
Supply volts must be +/- 5% of rated ballast line volts for reactor type and +/- 10% for CWA or electronic ballasts. (392)
UV filtered design (FadeBlock ). (396)
Operate only on thermally protected ballasts (397)
MasterColor Metal Halide Lamps are not recommended for use on dimmers and are not warranted if used on dimmer systems. (401)
conditions at 10 or more operating hours per start. It is based on survival of at least 50% of the lamps and allows for individual lamps or
Approximate lumen values listed are for vertical operation of the lamp. (352)
Means Lumens is the approximate lumen output at 40% of lamp rated average life. (353)
