Tristate Machinery Dismantlers Forum > MICHIGAN
> Machine Parts
> Electro ind gauge 3 ph power analysis power analyzer
Electro ind gauge 3 ph power analysis power analyzer
Electro Ind Gauge Tech. 3 Ph Power Analysis Test Equipment Electro Industries/Gauge Tech, Westbury, NY. On the display are push buttons for; Volts/Scan, Amps/Scan, Power/Scan, Phase/Next, % Of T.H.D., Max/Min, Limits, OVR.LMT/PRT PRO. There are 6 connections for 3 phase 3 clamp on probes. (6) screw connections for CT (A,B,C), (4) Voltage screw connections (N, A, B, C), Voltage Selector switch- 300V L-N Max, 600V P-P Max/ 150V L-N Max, 300V P-P Max. When connected to power the display does turn on but I do not know how to test it any further. Computer is Bondwell B200 with no operating or any other program. When turned on it shows- Non System Disc or Disc Error. There is no disc in the floppy drive. Computer can probably be replaced with newer computer and necessary program installed. Included are (2) clamp on amp meter; AEMC Corp., Boston, MA., AC Current Probe, Model SD604, P1-P2, Boston, MA, Probes are marked- Calibration Not Required, probes are 8 long with 10' wires. Also included are; computer power supply, computer to test equipment cable, 3 phase with neutral jumper cables, special cable with connectors (each connector is double sided with 24 points) marked- L-Com, CMB24 Series, IEEE-488. All the equipment is stored in a nice carry case 20 x 15 x 8.5 high.
