Tristate Machinery Dismantlers Forum > MICHIGAN
> Motors and tools
> New
> New cosen c-500MNC automatic miter cutting band saw -
New cosen c-500MNC automatic miter cutting band saw -
COSEN BANDSAW ~ NEW MODEL C500MNC
COSEN MODEL C-500MNC FULLY PROGRAMMABLE
AUTOMATIC MITER CUTTING BANDSAW - NEW
MACHINE VISE: FULL STROKE HYDRAULIC
INDEX VISE: FULL STROKE HYDRAULIC
SPEED - INFINITE VARIABLE: 102 377
3HP INVERTER CONTROLLED: 50 330 FPM
TENSION - MANUAL (HYDRAULIC OPTIONAL)
SAW BLADE - 3 HP (5 HP OPTIONAL)
FLOOR SPACE (L X W X H) 77.2" X 75" X 56"
THE SWIVEL SAWHEAD ALLOWS THE USER TO CUT AT ANY ANGLE BETWEEN:
90 (STRAIGHT CUT) AND 45 (MITER CUT)
THE PRECISION PICOT SYSTEM FACILITATES EASY AND ACCURATE ADJUSTMENT FOR ANGLE CUTS.
COSEN S C-500MNC HAS A PROTRACTOR AND POINTER IN CLEAR VIEW AND AWAY FROM ANY CHIPS COVERING THE NUMBERS
C-500MNC REQUIRES NO TOOLS TO MAKE ANGLE CHANGES.
BOTH SHAFTS ARE GROUND AND CHROME PLATED FOR DURABILITY AND SMOOTH MATERIAL FEEDING.
THE VARIABLE-SPEED BLADE DRIVE IS EQUIPPED WITH THE BEST WORM GEAR SPEED REDUCER.
THE WORM SHAFT IS HARDENED AND GROUND.
TOGETHER, THEY PROVIDE A QUIET, POWERFUL, AND TROUBLE-FREE DRIVE.
THE STANDARD BLADE SPEED CONTROL PROVIDES INFINITELY VARIABLE BLADE SPEEDS FROM 102 FPM THRY 377 FPM TO ACCOMMODATE ALL TYPES OF MATERIALS.
COSEN ALSO OFFERS AN OPTIONAL AC INVERTER DRIVE.
SYNCHRONIZED POWER DRIVEN BLADE BRUSH REMOVES THE CHIPS FROM THE BLADE, MAXIMIZING PRODUCTIVITY AND EXTENDING BLADE LIFE.
SMART NC-20 (SNC20) TECHNOLOGY PROVIDES MOST OF THE BENEFITS OF NC CONTROLLED SAWS AT A MERE FRACTION OF THE COST.
SNC20 CONTROLS ARE PROGRAMMABLE TO 20 DIFFERENT JOBS INCLUDING QUANTITY AND LENGTH OF CUT.
THE CONTROL AUTOMATICALLY COMPENSATES FOR KERF LOSS AFTER DATA INPUT AND REQUIRES NO MANUAL CALCULATION OF NUMBER OF TIMES TO INDEX.
THE CONTROL ALSO AUTOMATICALLY SHUTS DOWN THE MACHINE, BLADE MOTOR, AND HYDRAULICS ONCE THE PROGRAMMED NUMBER OF CUTS OR OUT OF STOCK SITUATION HAS BEEN ACHIEVED.
KEY PAD ENTRY OF PROGRAMMABLE QUANTITY AND LENGTH OF CUT WITH AUTOMATIC SHUT-OFF FOR FINISHED JOBS OR OUT OF STOCK.
STORED PROGRAM(S) MAY BE EASILY RECALLED AND EXECUTED AT WILL
LCD SCREEN WITH FILM TYPE KEY PAD
AUTOMATIC KERF LOSS COMPENSATION & AUTOMATIC MULTIPLE INDEXING UP TO 650
SAVE-A-BLADE FEATURE THE SHUTTLE VISE WILL AUTOMATICALLY RETRACT THE MATERIAL SLIGHTLY AFTER CUT-OFF, SO A BLADE CAN AVOID THE UNDESIRABLE ABRASION WITH MATERIAL, IMPROVING CUTTING TOOL LIFE.
ERROR CODE DISPLAY PROVIDES SIMPLIFIED SELF-DIAGNOSTICS.
PRECISION FEED PRESSURE & FEED RATE DUAL VALVE SYSTEM FOR OPTIMAL CUTTING PERFORMANCE IN ANY MATERIAL.
SELECTOR SWITCH FOR BUNDLE OR SINGLE CUTTING MODES.
AUTOMATIC WORK HEIGHT SENSOR AND AIR GAP ELIMINATOR POSITIONS THE SAW FRAME TO A SAFE CLEARANCE ABOVE THE WORK PIECE SO THAT THE NEXT PIECE CAN BE POSITIONED WITHOUT DAMAGING THE BLADE.
AFTER FEEDING, THE SAW HEAD WILL DESCEND QUICKLY TO WITHIN APPROXIMATELY 1/8 OF WORK PIECE WHERE IT PROCEEDS AT THE PREDETERMINED CUTTING RATES.
THE OPERATOR S CONTROL STATION LOCATED ON THE FRONT RIGHT SIDE OF THE SAW IS CONVENIENT AND USER-FRIENDLY.
ALL OPERATOR CONTROLS ARE POSITIONED ON THE TOP OF THE CONTROL BOX AND CLEARLY LABELED FOR EASE OF OPERATION.
SMART NC CONTROLLED MULTIPLE INDEXING FOR LONG CUTTING LENGTHS OF UP TO 650 MAXIMUM LENGTH, UTILIZING FULL SHUTTLE LENGTH EVERY INDEX (23.5 ) UNTIL DESIRED LENGTH IS REACHED.
THE MACHINE FRONT VISE AND INDEX VISE INCORPORATE FULL STROKING CYLINDERS TO PROVIDE TIGHT CLAMPING OF ANY MATERIAL FROM THE OPERATOR S STATION.
THIS ELIMINATES THE OPERATOR FROM HAVING TO HAND POSITION THE VISE WHEN MATERIAL SIZE CHANGES.
AS A VERY USEFUL FEATURE, LED LIGHT COMES ON TO INDICATE SECURE CLAMPING.
DUCTILE CAST IRON VISES WITH REPLACEABLE HARDENED WEAR PLATES.
ONE SET OF VERTICAL ALIGNMENT ROLLERS, WHICH IS CONVENIENT FOR BUNDLE CUTTING AND POSITIONING BAR STOCK, IS STANDARD AND IS LOCATED ON THE MACHINE BASE.
IN ADDITION TO THE STURDY CAST WORK TABLE, AN 18 SOLID DISCHARGE TABLE WITH COOLANT RETURN ADEQUATELY SUPPORTS CUT-OFF STOCK AND PROVIDES COOLANT SAVINGS IN THE LONG RUN.
MULTIPLE HORIZONTAL ROLLERS LOCATED ON THE ENTRY SIDE OF THE SAW TO FACILITATE SMOOTH MATERIAL FEEDING.
PROXIMITY SWITCHES SENSE BOTH BLADE SLIPPAGE AND BLADE BREAKAGE AND WILL AUTOMATICALLY SHUT OFF THE MACHINE IF EITHER OF THESE CONDITIONS SHOULD OCCUR.
ALL BLADE COVERS AND GUARDING ON THE SAW ARE PAINTED ALERT ORANGE TO INCREASE SAFETY ALERTNESS.
INTERLOCK DESIGN IN ELECTRICAL AND HYDRAULIC SYSTEM PREVENTS THE SAW BLADE FROM AN ACCIDENTAL START WITHOUT VISES SECURELY CLAMPED.
CONDUITS PROTECT ALL EXPOSED ELECTRIC WIRING AND HYDRAULIC CIRCUITS.
