Tristate Machinery Dismantlers Forum > MICHIGAN
> Motors and tools
> Used
> Omni 72" 3 point pt cultipacker for food plots & garden
Omni 72" 3 point pt cultipacker for food plots & garden
OMNI 72" 3 Point pt Cultipacker for Food Plots & Garden
It seems you have your choice of finding a 1930s model retired packer found in someones grove and restoring it, paying freight on a ton of steel to someone who has already done that or spending $1500-$2000 on a new cultipacker. We are adding another option for you. Our cultipackers are priced reasonably, made with high quality components and are assembled individually in our shop by midwestern craftsmen with northern European ancestry.
We start with a 4x4x3/16 square tube cross beam and then add 1/2x6x16 solid steel ends and a parking stand. Our 1 3/4" axle is a solid cold rolled round and we mount it in $90 ea American made bearings. No cheap $20 Chinese imports here. There are also 2 set screw locking collars included to prevent the wheels from rubbing on the end plates or bearings. The Category One 3 point mount is detachable and made with 1/4" and 3/8" steel. The notched packer wheels are 9 1/4" in diameter. We put 2 coats of a top quality gray enamel over 1 coat of primer to protect your new implement.
When your new Cultipacker arrives just bolt the 3 point tower to the main beam, slide the packer wheels on and tighten the set screws on the locking collars and bearings and start packing that prized foodplot you have worked so hard on.
We have included some pictures that show the 3 point/tow behind convertable model. It can be used with a 3 point tractor hitch or be pulled with an ATV or UTV and is available for an additional $100.
Check out our to see our other equipment!
Because we are a small shop we can respond to your questions and requests for modifications in a very timely manner.
Our email address is ****@tds.net and the shop phone number is (***)-831-7185
