Tristate Machinery Dismantlers Forum > MICHIGAN
> Motors and tools
> Used
> Saniflo sanipump gray waste water pump bathroom grey
Saniflo sanipump gray waste water pump bathroom grey
New Saniflo SANIPUMP Gray Waste Water Pump Bathroom NIB
Condition: Brand New, Factory Sealed!
The Sanipump is larger than the Sanishower and will handle a bathtub, a laundry sink, and more. It is more powerful than the Sanishower, but more economical than the Sanivite. The foot print is small and the sound level is quite low, and can therefore be placed inside a cupboard quite easily.
The Sanipump unit is comprised of a pressure chamber, which starts and stops the unit and the motor, which drives the pump. When water is entering the Sanipump a microswitch in the pressure chamber is activated, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle drives the impeller; the moving parts therefore are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer. The pump operates at 10 PSI and pumps the waste upwards to 16 feet and/or 150 feet horizontally. Once the water is discharged and the water level in the container goes down, the microswitch deactivates the unit water enters again. A normal operating cycle for Sanipump can be as short as 2-10 seconds depending upon the discharge pipe rune configuration, power consumption is therefore minimal.
* Dimensions: 10 1/4 x 13 1/4 x 6 1/2 inches
* Max. vertical discharge: 12 ft.
* Max. horizontal discharge: 150 ft.
* Electrical supply: AC 120 V 60 Hz 4.5 A
*** Please look at our other listings for more Saniflo Products! ***
* If you have a specific question on the use and or installation of an item, please refer to the manufacturer's website.
* Wire transfers are accepted, please contact us for more information if you would like to pay via wire transfer.
* If an item is received by you as not working, damaged from transit, not as described, etc. please contact us immediately.
* Unauthorized returns, or items returned for reasons other than defect, damage or inaccurate description are subject to 10% restocking fee.
