Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Industrial Machines
> Used
> 3 organomation liquid solvent extractors rot-x-tract-lc
3 organomation liquid solvent extractors rot-x-tract-lc
Rotor Extractor Rot-X-Tract-LC Model No. 13318
Analytical Solvent Evaporators
Analytical Solvent Extractor for Sample Preparation
Corning Accelerated One-Step Extraction System
The upper instrument consists of a stand assembly, cover disk, condenser holder and a rotating water supply. The stand rotates so that all positions are accessible from the front. Parallel manifolds provide cooling water equally to all condensers, and have one supply line and one drain line. Accessories include a thermometer, water flow meter, quick-disconnect tube fittings and tubing.
The stainless-steel water bath is thermostatically controlled and it will accurately maintain water temperature up to 100 C. It has a constant water-level device. A high temperature safety switch and a GFCI electrical plug are installed for safety. An intrinsically safe, purged case is available as an option. The bath has Underwriter's Laboratory approval for laboratory use in the USA and in Canada.
Accomodates the Corning Accerated One-Step* extractors in a compact arrangement.
Glassware is easily installed and removed.
Instrument operates unattended after initial set-up.
Single heat source provides even, reliable heat without the need for pressurized hot-water plumbing
Solvent volume of 100ml extracts a 1-liter water sample.
Performs both the extraction and concentration steps
Waste solvent is recovered for a cleaner enviroment.
The ROT-X-TRACT-LC holds and operates up to eight Corning Accelerated One-Step extractors. This system will process water samples quickly while using less solvent than other methods. After initial loading, the unit can operate unattended. Sample extraction can normally be completed in six hours.
Glassware is securely held in position by ring stands and clips. The condensers are supported by stainless-steel plates and can remain in the instrument when the extractors are removed. The water manifolds are equipped with quick disconnect/auto shut-off fittings for convenience. For more information on the glassware please see other page.
A recirculating water chiller is recommended as an accessory. It allows precise control of condenser temperature, minimizes solvent loss, and conserves water. We have 2 models available: The 875-watt unit @ 120 volts is Catalog # 17740; the 2,350-watt unit @ 240 volts is Catalog # 17750-2. Please specify when ordering.
New In Like New Condition In Great Condition
Most of the glassware that came with these instruments is NEW.
All of it is in great condition.
Evaporator One: New, never used.
DSCN3122DSCN3121DSCN3126DSCN3130
Evaporator Two: In Like New Condition
DSCN3156DSCN3157DSCN3158DSCN3165
DSCN3161DSCN3159DSCN3160DSCN3163
Evaporator Three: In Great Condition, used.
DSCN3166DSCN3169DSCN3170DSCN3171
DSCN3174DSCN3173DSCN3175DSCN3178
Glassware, Clamps, Hoses, Valves, Manuals, etc.:
DSCN3099DSCN3107DSCN3109DSCN3108
DSCN3110DSCN3111DSCN3113DSCN3114
DSCN3116DSCN3180DSCN3186DSCN3193DSCN3194
DSCN3182DSCN3184DSCN3187DSCN3115
DSCN3188DSCN3191DSCN3192DSCN3197
DSCN3195DSCN3196DSCN3198DSCN3202
To sell all photos of this lot, please click here
One 48 x 40 x 48" pallets with the three instruments.
One 48 x 30 x 30" crate with LOTS of packaging to keep the glass intact.
Price includes packaging and palletizing.
