Tristate Machinery Dismantlers Forum > WISCONSIN
> Electrical Components
> Honeywell 3/4" npt 2 way valve
Honeywell 3/4" npt 2 way valve
HONEYWELL VCZAL1100 2-way 3/4 in. female NPT connection VC valve assembly for hydronic with 4.7 Cv and linear flow. Two-way Cartridge Cage Valves are intended for hydronic applications in a normal indoor environment to control the flow of hot water or chilled water glycol solution to 50% concentration. These valves are designed for zone control of heating/cooling systems, or to control individual fan coil, baseboard radiator or convector applications. Depending on the model selected they can be controlled by either a low or line voltage SPST or SPDT two position controller, or tristate (floating) or modulating proportional controller. For trouble-free operation of the product, good installation practice must include initial system flushing, chemical water treatment, and the use of a 50 micron (or finer) system side stream filter(s). Remove all filters before flushing.
Quick open, linear, and equal percentage control characteristics available Bi-directional installation. Models for two position or proportional control.
High close-off rating independent of Cv. Available with a variety of North American and international pipe fittings. No tools required for actuator installation or removal.
Actuator removal does not require draining system. Service is by replacement of cartridge, not valve body.
