Tristate Machinery Dismantlers Forum > WISCONSIN
> Industrial Machines
> New
> Negri bossi injection molding machine nb-130
Negri bossi injection molding machine nb-130
Negri Bossi Injection Molding Machine
Negri Bossi injection molding machine.
Model NB-130. Built in 1988. 30 ton clamping pressure.
Platen size 25" wide x 25" high.
Distance between tie bars 16" left to right, 16" top to bottom.
4.5 oz (133cc) shot capacity.
30" daylight, 1-1/2" screw feed, 41" long.
Driven by a two speed motor: 15 kw, 60/220 volt, 1170 rpm; 18.5 kw, 60/440 volt, 1170 rpm. Bottom discharge.
Owner has had this machine for over 8 yrs. in their manufacturing plant in Colorado. The machine runs very strong and does very well. A NEW machine was purchased, so this one needs a new home. A new computer mother board was put in, and a lot of the seals were changed out in the last few years. Now there is nothing wrong with the machine with these fixes performed.
This machine will come with instruction manual, prints, electronic grid & the number to the parts person in the event that the machine needs new parts.
You need to provide your own transportation. Rigging can be provided at a cost of $350.00 loaded on a flat bed. Happy to put you in touch with the owner if you like - send me your name and phone and best time to call.
