Tristate Machinery Dismantlers Forum > WISCONSIN
> Motors and tools
> Bunn coffee fmd-3-ss-0198| hot powdered drink machine
Bunn coffee fmd-3-ss-0198| hot powdered drink machine
Bunn Coffee FMD-3-SS-0198| Hot Powdered Drink Machine
FMD-3 SS Hot Powdered Drink Machine
3 hoppers (4 lb. capacity each)
Variable speed motors allow control of product consistency in mixing
chamber (.75 to 6.6 grams of powder per second).
Lighted front graphics for merchandising are easy to exchange: cappuccino
Attractive high-impact resin door is dent and scratch resistant. Black finish
Large easy-to-fill translucent hoppers hold 4 lbs. (1.81 Kg) of product each,
ensuring quick and timely refilling.
High speed heavy-duty whipper for complete product mixing.
Improved automatic rinsing of whipper reduces run-on after beverage is
Adjustable legs and drip tray accommodate 20 oz. (.59 liter) mugs easily.
Electrical and plumbing components easily accessible through front and top.
International electrical configurations available.
Easy-to-program, one-touch portion control for 3 cup sizes.
Fast fill perfect for quick service restaurants.
Each mixing chamber has independent powder to water ratio.
System setup is password protected for safety.
Simple setup and hopper throw calibration system.
Electrical: 120V model requires 2-wires plus ground service rated 120V, single phase, 60 hz. 120/240V model requires
3-wires plus ground service rated 120/208 or 120/240V, single phase, 60Hz.
Plumbing: 20-90 psi (138-621 kPa) from a 3 8" (10 mm) or larger supply line. A shut-off valve should be installed in the line
before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied
with 1 4" (6.4 mm) male flare fitting.
SET000198|SET00.0198|FMD-3-SS-0198
FMD-3 SS Hot Powdered Drink Machine, cafe lighted front display, stainless decor, 3 hoppers (4 lb. capacity each), variable speed hopper motors, 120v/15amp
