Tristate Machinery Dismantlers Forum > WISCONSIN
> Motors and tools
> OPTO22 IDC5BQ quad dc input i/o module
OPTO22 IDC5BQ quad dc input i/o module
Opto22 IDC5BQ Quad DC Input I/O Module
Quad Pak modules contain the equivalent of four single channel I/O circuits in a single high-density package. Each Quad Pak module can be divided into two pairs with each pair sharing a common connection. The Quad Pak modules are designed to plug into the Quad Pak high-density I/O mounting racks only and cannot be plugged into single-channel racks. Quad Pak modules are designed to work with a 5 VDC logic voltage only and can be used with Optomux, Pamux, and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. DC input modules are used for sensing ON/OFF DC voltage levels. All DC input modules, with the exception of the IDC5BQ, are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. The IDC5BQ module is a fast-switching input module for signals produced by photoelectric switches, encoders, DC proximity switches, or TTL devices. Each module provides up to 4,000 Vrms of optical isolation between field inputs and the logic side of the circuit.
* Push button and toggle switches
* Operating Ambient Temperature: -30 to 70 C
* Isolation Input-to-Output: 4000 Vrms
* Output Voltage Drop: 0.4 volts @ 50 milliamperes
* Output Current: 50 milliamperes
* Output Leakage with No Input: 100 microamperes maximum @ 30 VDC
* Output Transistor: 30 volts breakdown
* Input Voltage Range: 4 16VDC
* Input Current @ Maximum Line: 45mA
* Input Allowed For No Output: 0.7mA / 1V
* Logic Supply Voltage Nominal: 5VDC
* Logic Supply Voltage Range: 4.5-6VDC
* Logic Supply Current @ Nominal Logic Voltage: 12mA
* Input Resistance (R1 in Schematic Diagram): 300 ohms
* Control Resistance (R2 in Schematic Diagram): 220 ohms
