Tristate Machinery Dismantlers Forum > ILLINOIS
> Industrial Machines
> Used
> With Warranty
> Iai servo motor controller linear acutator econ 100W
Iai servo motor controller linear acutator econ 100W
IAI Servo Motor Controller (ECON-I-100-EU-2-N)
This controller is in good used condition. The case appears to be in NEW CONDITION. These controllers will come with 24in pigtails (with controller interface connectors) for the Encoder and Motor functions. We have also included all of the extraneous Phoenix Contact connectors and other cables. The mating connectors have been cut off of the controller side of the cables, so a little re-work will be required to reattach the two.
Open Network: Not network-ready
Unknown: Possibly I/O signal type: NPN?
Rush current (Maximum, instantaneous)2
1,200g (Standard), 1,500g (Absolute specification)
Temperature: 0 to 40 C; Humidity: Less than 85% RH
Circuit voltage abnormality, motor excessive current, Power stage abnormal heat, Encoder abnormality, Motor excessive load
RDY (green), RUN (green), ALM (red), ENC (orange)
1. Instantaneous value is 3 times more.
2. Select a medium-speed NFB.
3. The withstand voltage of the motor used in the actuator is 1000V for 1 minute. Before performing a withstand voltage test with the controller and actuator connected, make sure that the supplied voltage will not exceed 1000V for a period over 1 minute.
Manufacturer data sheet is available here.
