Tristate Machinery Dismantlers Forum > INDIANA
> Electrical Components
> Used
> With Warranty
> 3M speedglas adflo respirator/no welding helmet/mask
3M speedglas adflo respirator/no welding helmet/mask
COMES WITH SPARK ARRESTER(used),PRE-FILTER(used) AND PARTICLE FILTER(used)
Speedglas has reinvented the powered air-purifying respirator for welders. The result is Speedglas with Adflo: a lightweight, compact, all-in-one system. The exclusive "stackable" configuration means that the optional Adflo organic vapor cartridge can be "stacked" onto the High Efficiency (HE) particle filter for additional protection against organic, sulfur dioxide, chlorine, and hydrogen chloride vapors.
In effect, it's two systems in one, allowing increased user flexibility to adapt to changing welding applications. And you can selectively replace either the particle filter or the optional Adflo OV/SD/CL/HC cartridge as needed: you don't have to change both filters at the same time!
The Adflo system has no external batteries, no battery cables, and no sharp corners. Its slim profile is designed to go into tight spaces. And it is the most ergonomically perfect PAPR available to welders.
* Standard High Efficiency (HE) particulate filter protects against the following exposures:
Hexavalent Chromium metal fume
Steel/Manganese Alloys fume
* Optional Adflo OV/SD/CL/HC vapor cartridge protects against:
* Exclusive "stackable" configuration adapts to changing welding applications.
* Environmentally-friendly NiMH battery charges in less than 3 hours with a smart charger that won't ever overcharge.
* System Intelligence: Constant Airflow Rate, regardless of battery charge and filter loading. Audible and visual alarms signal low airflow and low battery charge.
* The unique belt design has a solid leather front, cut narrow to allow the welder to bend forward easily. Along the welder's sides, the leather becomes wider, with large ventilation holes for maximum breathability. The turbo unit securely attaches to, and is nestled between, the two plastic arms of the belt so the turbo's weight is evenly distributed across the entire lower back and upper hips. The plastic arms are vertically rigid but with pleats so the welder can move and turn with freedom.
* Exclusive airflow pattern means perfectly-distributed air throughout the entire breathing zone of the helmet.
* Assigned Protection Factor: 25
* Airflow (nominal): 6+ cfm (170+ lpm) minimum
* HE + OV/SD/CL/HC: up to 5.5 - 6 hrs/charge
* Battery Charging Time: 3 hours
Adflo Turbo w/ Battery, Breathing Tube & Belt: 4.48 lbs (2.03 kg)
Optional OV/SD/CL/HC Cartridge: 17.9 oz
* Operating Temperatures: 23 to 131 F (-5 to 55 C)
* Respirator Approval: NIOSH 42 CFR 84 (link to NIOSH: www.cdc.gov/niosh/homepage.html
AND WILL RECIEVE A NONE PAYING STRIKE,YOU ONLY NEED 2 AND YOUR OUT!
AS YOU MIGHT SEE IN THE PICTURES THE BELT IS WORN AND HAS HAD A NEW LEATHER BIT ADDED
IT ALSO COMES WITH A FLOW METER
THE FRONT SILVER COVER HAS BEEN RE-SPRAYED
AND THE ADFLO DOES MAKE A SLIGHT BUZZING NOISE WHEN MOVED ABOUT (AS SOME DO) BUT STILL PUMPS PLENTY OF AIR OUT(THINK ITS SOMETHING TO DO WITH THE FAN BEING OUT OF BALANCE)
