Tristate Machinery Dismantlers Forum > INDIANA
> Electrical Components
> Used
> Without Warranty
> 3 phaco handpieces, suction tubing & sterilization case
3 phaco handpieces, suction tubing & sterilization case
Units are in overall good cosmetic condition. Units have not been tested as we do not have the connections to do so. The sterilization case has a tray with molded compartments. The lid has tape residue, a chip missing in the lower left corner and a spider crack in the middle. The case measures approximately 15 1/8" x 9 1/2" x 1". The white cable with two connectors, one at each end is marked with number 10308. The needles are labeled with numbers 108 and the other one is R2396. There are two plastic suction cables. One cable gas a needle in one end and each has a connector. One grey handpiece is labeled P8308 and is in good cosmetic condition. The other handpiece does not have any label on it but does have a chip missing from the locking slide and does not lock the needle in place. The other handpiece has some tape residue. The number is F-5306.
