Tristate Machinery Dismantlers Forum > MICHIGAN
> Electrical Components
> Used
> With Warranty
> Shortridge hydrodata multimeter hdm-250 meter
Shortridge hydrodata multimeter hdm-250 meter
Shortridge Hydrodata Multimeter HDM-250 Meter
DIFFERENTIAL and GAGE PRESSURE - WATER OR AIR:
Accuracy is 2% of reading last digit from 0.1 to 250psi.
0.5 F accuracy from 32 F to 158 F. Safe range is -100 F to +250 F.
Resolution is 0.1 measured in degrees Fahrenheit ( F) or degrees Celsius ( C) using the optional Series ADT400 TEMPROBE sensors or MT-440K AIRDATA MULTITEMP.
Full range internal temperature compensation for meter exposure ranges from 40 F to 140 F.
100 sequence labeled, reading sets of pressures and/or temperatures in any selected units.
Each meter certified, NIST traceable.
8 digit, 0.5", high contrast, liquid crystal display.
Two to four seconds standard and up to eight seconds per reading in "SLOW" mode.
Meter; two quick disconnect fittings, 1/8" chrome plated brass. Valve Network Panel; two 1/4" 45 male flare fittings for pressure hoses.
20 hours per charge. 500 recharge cycles.
