Tristate Machinery Dismantlers Forum > MICHIGAN
> Motors and tools
> Used
> Without Warranty
> 16 usg 4-1/2" solfrunt process gauges -salvage lot
16 usg 4-1/2" solfrunt process gauges -salvage lot
16 USG 4-1/2" Solfrunt Process Gauges -Salvage Lot !!
* 16 USG Solfrunt 4-1/2" Process Gauges -Salvage Lot
* 30" vacuum & 30 PSI, brass tube, was liquid filled but lens is cracked, with Ametek seal, seal is corroded
* 15 PSI, stainless tube, with Ametek seal, corroded seal bolts, set to under zero
* 30 PSI, brass tube, set to 1 PSI
* 30 PSI, brass tube, set to 4 PSI
* 60 PSI, brass tube, with Ametek seal, set to 6 PSI
* 100 PSI, brass tube, with Ametek seal, set to 20 PSI, corroded seal bolts and face looks burnt
* 100 PSI, brass tube, with Ametek seal top half, set to 9 PSI
* 100 PSI, brass tube, with Larad seal, set to just under zero
* 100 PSI, brass tube, set to 12 PSI
* 100 PSI, brass tube, set to max next to peg
* 100 PSI, brass tube, liquid filled, with seal, set to zero, tag says seal was fill was released and needs to be refilled
* 160 PSI, brass tube, broken lens (I am including a replacement lens I had on hand), set to 135 PSI
* 160 PSI, brass tube, with Ametek seal, corroded seal bolts, set to just over zero, dirty
* 160 PSI, SS tube, with fitting, set to about 4 PSI
* 300 PSI, brass tube, set to 37 PSI, bent pointer
* 300 PSI, brass tube, set to about 120 PSI, bent pointer
