Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Electrical Components
> New
> Without Warranty
> Strobette 1000 - digital strobometer
Strobette 1000 - digital strobometer
Strobette Stroboscope/Tachometer
The STROBETTE Model 1000 Stroboscope/Tachometer combines a versatile stroboscope with an analog tachometer. This lightweight, hand-held unit is ideal for engineers, technicians and inspectors.
Typical applications include production, maintenance, quality control, and service.
The Model 1000 stroboscope optically stops the motion of an object, while the tachometer instantaneously reads its speed. When using stroboscopic light, a device will appear to be moving slowly when the flash rate is off tune compared to the repetition rate of the motion.
The Model 1000 features an internal U-shaped lamp with a flash duration of 70 100 microseconds. The reflector beam angle is 80-degrees. The flash rate is adjustable using a dial from 200 to 6000 flasher per minute. Accuracy is +3.0% FS.
* Dual function Strobe and Tachometer
Integral strobe lamp. Beam angle of the reflector is 80-degrees.
Flash Duration: 70 - 100 microseconds
Flash Tube: U-shaped, Xenon-filled
TRIGGERING MODES & FLASH RATE RANGE:
Internal mode uses an RC oscillator adjusted with a one turn control dial.
Flash Rate Range: 200 to 6000 FPM (4 to 100Hz)
Temperature Drift: +100 ppm/oC
Long Term Drift: +500 ppm/hour
200 to 6000 FPM analog tachometer
: Intermittent (1/2 time ON, 1/2 time OFF). Maximum ON time: 10 minutes for ambient temperature up to 86 F (30 C); 5 minutes for ambient temperature up to 122 F (50 C).
Model 1000/115 115Vac +10%, 50/60Hz
ENCLOSURE: Molded, high-impact plastic case. Unit has 1/4 -20 female tripod socket.
Operating Temperature: 32 to 122 F (0 to 50 C)
Storage Temperature: -40 to 175 F (-40 to 80 C)
Humidity: 95% R.H. (non-condensing)
3 x 3 x 7-inches (76.2 x 76.2 x 177.8mm)
