Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Electrical Components
> Used
> Without Warranty
> New premium 10 lb. coffee roaster bbq drum roasting
New premium 10 lb. coffee roaster bbq drum roasting
This Premium 10 lb. Coffee Roaster Drum for BBQ comes fully assembled and ready to go. Fits inside of your Home Barbeque unit and attaches to your existing Rotisserie unit (if you do not have a Rotisserie unit for your BBQ you can purchase one from Home Depot, Lowes, etc. A recommended one to purchase is the Char-Broil Premium Universal Fit Rotisserie.) You may also wish to consider purchasing our own Commercial QuikSPIN-CRC 60 RPM AC Motor System for optimum roasting (note: this system is not a requirement for roasting with our drums). Complete operating and roasting instructions included, along with 1/2 cup unroasted green coffee beans to start you off. Can easily roast up to 10 pounds of coffee at a time, much more than other more expensive units.
This is the Premium Model which has a Stainless Steel cage out of 20-Gauge Perforated Stainless Steel, suggested for commercial high-volume roasting, or similar heavy demand roasting applications. End cap plates are 16 gauge aluminum; aggressive interior finwork is a mixture of stainless steel and aluminum. Construction is riveted.
You would place the drum inside of your Home BBQ unit, attached to your Rotisserie Unit. Note the following information to make sure the drum will fit into your grill: Drum length is 24 inches, and end cap plates are 8 inches in diameter. Cylinder diameter is 7 inches. Please make sure your grill will accomodate this drum before purchase; take into consideration additional breathing room of 2 inches on each side of drum and one inch clearance from drum to top inside of lid when closed, and at least 1/2 inch from burner heat shields.
We provide complete details on attaching the Coffee Roasting Drum to your Rotisserie Unit.
Q: I do not have the rotisserie to put the Coffee Roaster Drum on. Do you have suggestions on a good Rotisserie unit for this application?
A: Absolutely not. The Coffee Roasting drum is 100% metal construction. The perforated cage is 20 gauge Stainless Steel; the end cap plates are 16 gauge Aluminum; the interior finwork is Aluminum and Stainless Steel.
Q: Is this Coffee Roaster Drum designed for Gas or Electric Grills, or both?
