Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Industrial Machines
> New
> Dental handpiece lubrication maintenance clean system
Dental handpiece lubrication maintenance clean system
AUTOMATIC DENTAL HANDPIECE CLEANING LUBRICATION SYSTEM
it can clean and oil 1 pcs of E-type handpiece and 2pcs of Air turbine at the same time
1. Helps to perform uniform handpiece maintenance and lubrication.
2. Three handpieces can be cleaned and lubricated simultaneously keeping your hands clean.
3. TPCUSA rotating gear effectible and efficiently cleans and lubricates contra angle handpiece.
4. Pressing the air key can purge excess oil from the handpiece after lubrication and cleaning cycle to some extent.
5. Select the lubrication setting time from Short Mode, Long Mode and Extra Long Mode according to the handpiece.
6. The mist filters attached behind the door can keep mist leakage to minimum.
0.35-0.6Mpa(3.5-6.0kgf/c ) (50-85psi)
regarding to the power supply: The power supply can be used in worldwide,i will send you the right plug to fit your country.
There are 3 mode on the machine.the following is the handpiece fits for each mode:
All handpiece(make a selection when adeauate lubrication and cleaning cannot be performed in the Short Mode or Long Mode) Increasing
Contra Angle Handpiece Recreasing Contra Angle Handpiece Air turbine handpiece,contra angle handpiece,and straight handpiece by other makes
