Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Industrial Machines
> New
> Without Warranty
> Low melting point solder 0.25MM diameter for smt repair
Low melting point solder 0.25MM diameter for smt repair
Approx 10 metres of 0.25mm LMP rosin flux cored solder. This solder has a melting point of 179 degrees Celsius and is designed for precision soldering of small components on PCBs. It is a lead/tin solder with 2% silver which gives it the characteristic of changing from solid to molten and back to solid over a very small temperature change making it ideal for surface mount device rework and repair. This is a very fine gauge solder which requires a very fine tipped soldering iron for working with closely spaced connections.
The solder specification is 62S which is made up of 62% lead, 36% tin and 2% silver and is the industry standard for surface mount component rework and repair.
Please note if you order more than one lot then I supply the total in one continuous length unless you request otherwise.
