Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Industrial Machines
> Used
> Without Warranty
> Hp E1328A 4-channel d/a converter w/ size c adapter
Hp E1328A 4-channel d/a converter w/ size c adapter
This item was removed from a working test system. This board has been adapted to use in a
C-size mainframe with an HP E1403C.
The HP E1328A 4-Channel D/A Converter is a B-size, 1-slot, register-based VXI module. It has four independent, isolated
digital-to-analog channels configurable for either dc voltage or dc current output. Remote voltage sensing is available with
no-fault operation. All four channels are independently isolated and may be floated up to 350 Vdc from ground. Multiple
channels may be connected in series or in parallel to increase the voltage or current range (to 48 V or 96 mA using a single
module). The D/A converter can be calibrated through software commands. You can use this module in a system with a
5.5-digit multimeter (HP E1326B or equivalent) and multiplexer. Then, the system can be programmed to automatically
calibrate the D/A outputs to 24-hour specifications each day. This product has been adapted for use in a C-size mainframe.
THIS ITEM IS NOT FOR SALE OUTSIDE THE UNITED STATES!
