Tristate Machinery Dismantlers Forum > STATE OF IOWA
> Machine Parts
> Used
> New lot of 4 extremeair GXT6 fast hand dryers 120V abs
New lot of 4 extremeair GXT6 fast hand dryers 120V abs
$1,320.00 for a lot of 4 (Just $330.00 per Dryer)
With its patent pending technology, the EXTREMEAIR hand dryer is 3X faster - it dries hands completely in 10-15 seconds. This is accomplished with a powerful blast of warm air that quickly breaks up the layer of surface water on a user s hands for quick removal and evaporation.
While all American hand dryers save trees and reduce landfill waste - The EXTREMEAIR hand dryer uses up to 80% less energy than conventional hand dryers.
The new GXT high performance automatic hand dryers are 2-3 times faster than a conventional hand dryer. The stylish, compact design saves 95% versus paper towels and provides great performance while consuming 80% less electricity. The GXT's patent-pending design will provide many years of trouble-free service.
A recess kit is available to reduce the depth of the dryer to less than 4 inches for ADA compliance.
Cover One-piece heavy duty, flame retardant ABS polymer with white finish. Optional one-piece 18 gauge steel cover finished with electrostatically applied, chip-resistant white epoxy finish (M), or chrome plated satin finish (C).
Motor Powerful series commutated through-flow discharge vacuum motor/blower with automatic resetting thermal protector. 5/8 HP, 24,000 RPM.
Automatic Sensor 100% solid state design eliminates relay contact failures. Microprocessor controlled infrared sensor turns dryer on when hands are under the air outlet. Dryer turns off when hands are removed. Override turns off in 80 seconds if hands are not removed.
Heating Element Constructed of NiChrome resistance wire with automatic resetting thermostat. Heating element operates in the black range for maximum life. Heating element is enclosed within blower housing and therefore inaccessible to vandals.
Tamper Resistant Two tamper resistant screws secure cover to steel base. Blower air intake is shielded for additional safety.
GENERAL HAND DRYER INFORMATION
Dryers should be placed at least 2 feet apart and at least 12 from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18 above any projection which may interfere with the operation of the automatic sensor.
Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.
QUANTITY ESTIMATE, HAND DRYERS:
Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54 Bradley sink..............................4 dryers per sink
