Tristate Machinery Dismantlers Forum > WISCONSIN
> Electrical Components
> New
> Without Warranty
> 2X dental delma cordless curing light lamp high power
2X dental delma cordless curing light lamp high power
2x More Than 1200mW/cm2 Wireless Curing Light
Dormant Function to Save Battery
3 Solidification Working Mode: Full Mode; Ramp-up Mode; Pulse Mode
Automatic Memory Function: Memorize The Latest Used Working Mode and Time
Can be uesd Worldwide 100v-240v
More Than 250 Treatment For Each Full Charge:20s/treatment
Light Output: More Than 1200mW/cm2
7. 2 Operation Manual in English
8. 2 Free Plug Adapter If necessary
1.5 million treatment (20s is commended one treatment)
LED Curing Light is used to solidify the dental resin quickly.It is a perfect combination of technology and fashion, with popular outward appearance, the world's advanced high intensity and waterproof design.
Three Solidification Working Modes
F:Full Mode-output with entire power within 10s
R:Ramp-up Mode-output gradually in the first 10s then reaches the entire power peak followed by intense curing function until the process ends.
P:Pulse Mode-Output with zero-power and entire power by turns every two seconds.
If the product is not working over 30s,it can automatically turn into the inactive state to save battery. During the dormant state, the product's direction lights will turn off automatically.Press any key on the panel can bring the function back to normal working situation.
The product will automatically memorize the latest used working mode and time, no matter whether it is after the dormant state or charging state.
There will be sound alerts if you choose working modes,start,curing process(every 5s)or end the process. The alert appears as a low-frequent sound"BEE". And if the Battery's voltage is down and needs recharge, the sound alert should be two high-frequent sounds"BEE".When it reminds about low-voltage that means the curing light's power can't be assured.In this case, you can extend the irradiate time to assure the curing effect.
