Tristate Machinery Dismantlers Forum > WISCONSIN
> Electrical Components
> Used
> Warranty and Guaranties for the customers
> Matte black 56" industrial ceiling fan-
Matte black 56" industrial ceiling fan-
This is a brand new ceiling fan it features:
* 188 x 15mm high torque motor
*3 metal blades with trailing edge turned down
*Single speed/300 RPM free run
*Limited Lifetime Warranty from the mfg
Effective area served by each fan installed for various ceiling heights:
Ceiling Height Effective Sq Ft Area Served
This does not come with a wall control, but I do have them for you to purchase. Please let me know if you are interested in the a wall control.
Industrial ceiling fans rotate at higher speeds than most household ceiling fans. Their blades are also thinner and made of metal rather than wood. Severe injury can result if any part of the body comes in contact with the rotating blades. Industrial ceiling fans are not recommended for use in household applications. Can be connected to 120 volts only.
Create a cooling breeze of air close to the floor area where most work is done. Hang the fans on long downrods, but at least 7-8 feet off the floor. Special applications may require even greater clearances. Circulate air without pulling hot air down from the ceiling. Since fans do not actually cool the air they move, use more fans per square foot area than the chart recommends.
Best use is to reclaim heat trapped at the ceiling, often 20-40 feet above the floor where temperatures can vary as much as 20 degrees. Hang fans high, but at least 36" down from the ceiling to force warm air down into the working area.
