Tristate Machinery Dismantlers Forum > WISCONSIN
> Electrical Components
> Used
> Warranty and Guaranties for the customers
> Rod-l M25 25 amp ground tester
Rod-l M25 25 amp ground tester
ROD-L M25 25 AMP GROUND TESTER
Ground Continuity Test Instrument
Performs ground continuity tests in full compliance with BSI, VDE and IEC
Test time is adjustable from 1 second to 90 seconds
Measures AC resistance from Chassis of Device Under Test (DUT) to power-cord ground lead - 0 to 0.15 ohm
Audible and visual alarms identify faulty ground connections
Hipot interface enables interconnecting to any ROD-L ROD-L Hipot Test Instrument to form an automatic test system
AC power source supplies 25, 30m 35 Amps (user specified) at 2.5 volts
ROD-L Hipot Test Systems Interfacing
The Ground Continuity Test Instrument can be interconnected with any ROD-L Hipot Test Instrument to operate as a fully automatic system
One connection for DUT, and one start button to press
Front panel receptacle is rated to 8000 VAC
Front panel receptacle prevents director operator exposure to high voltage during test
Production/Quality Assurance Testing
After test parameters are preset, a single button actuates the Fully Automatic test cycle
Measures ground continuity from chassis ground to the power cord ground pin of the DUT
Detects and indicates the following:
Resistance measurement, 0-0.15 ohm
Current measurement in amperes
Ground resistance trip point easily preset via rear panel potentiometer
If the ground resistance exceeds the preset value, a fail is indicated both audibly and visually