Tristate Machinery Dismantlers Forum > WISCONSIN
> Industrial Machines
> Used
> With Warranty
> Banksy rat playing violin (violist viola) heat transfer
Banksy rat playing violin (violist viola) heat transfer
LET'S GET PERSONAL! IT'S FUN AND EASY!
APPLY OUR DESIGNS TO YOUR FAVORITE T-SHIRT, POLO, SWEATSHIRT, JACKET..
REDUCE COST WITH JUST YOUR HOME IRON!
TRANSFORM SOMETHING OLD IN TO SOMETHING NEW!
Print all fabric colors (Black t-shirt etc...)
Laptop bags, flags, jackets, pillow-cases.. The print possibilities are endless..
Easy to apply with your home iron - No sewing required - Available in 14 colors
Fully machine washable - Direct Ironable
Will never shrink, twist, fade or fall to pieces
THIS IS NOT A CHEAP HEAT TRANSFER
This is a thin and stretchable, professional, semi-mat vinyl flex,
for transfer on cotton, polyester, acrylic and similar fibres,
coated with a superior quality thermal activated adhesive.
NEGATIVES OF CHEAP HEAT TRANSFERS
You can only apply them on light colors fabrics.
Are just prints on cheap transfer papers from a home printer.
Of course are not full washable (need cold water, no detergent etc) and no ironable.
Cheap transfers shrink, twist, fade and fall to pieces after some washes.
Don't waste your time and destroy your clothes with cheap products.
HERE THE DESIGN PRINTED IN A CLASSIC STYLE T-SHIRT
- YOU WILL RECEIVE A HEAT TRANSFER, NOT A T-SHIRT -
IF YOU NEED THIS DESIGN PRINTED IN A T-SHIRT, JUST SEARCH OUR SHOP!
Print Size: 12 Inches / 31 cm [Approx / Measured Longest Side]
White, Lemon, Yellow, Orange, Pink, Red, Light Blue, Royal Blue, Navy, Light Green, Green, Silver, Gold, Black
If you don't do that we 'll send you the default (picture) color.
MAYBE YOUR TRANSFER HAVE A PROTECT WAX PAPER. REMOVE WAX PAPER BEFORE APPLICATION.
IF YOU HAVE LETTERS / NUMBERS AND YOU DON'T WANT TO APPLY TOGETHER
CUT THE CLEAR PLASTIC SHEET AROUND EACH LETTER.
LEAVE THE LETTERS ATTACHED TO THE PLASTIC SHEET.
1) PLACE THE MATERIAL SIDE FACING DOWN ON THE T-SHIRT & CLEAR PLASTIC FACING UP
2) IRON THE ENTIRE TRANSFER FACING UP WITH FULL HEAT FOR ABOUT 1 MINUTE
3) LEAVE IT COOL COMPLETELY FOR 2-3 MINUTES
4) REMOVE THE STICKY CLEAR SHEET "FOR EASY PLACEMENT"
5) DIRECT IRON IT AGAIN IF YOU WANT..
WE CAN SEND YOU FREE EXTRA TESTER WITH YOUR ORDER TO PRACTICE
Add me to your favorite sellers and stores!
Shiny plastic side of the sheet is UP and peeled off your clothing after the transfer has cooled.
Matte side is down and stuck to the clothing. Don't get them confused or you'll cover your iron with gunk.
You can use a wooden cutting board (or do the job on a table) inside the piece of clothing to stabilize it for the transfer.
No pillowcases/protective papers needed. Iron directly onto the plastic sheet stuck to the top of your transfers.
Some irons have little holes in the bottom. This means that with a home iron you're going to get areas of direct heat, and non-direct heat.
To avoid transfer look "bubbly" apply heat AND force AND then reposition the iron on the same area, to minimize uneven heat application.
Don't peel off the upper plastic layer until it has shrunk away from the transfer's edges slightly, is a little "bubbled," and is room-temperature.
The heat transfer material comes as one big sheet, and you can do anything with it - trace letters, cut it into tiny shapes,
whatever you want, the possibilities are endless.
ORDER ENOUGH TO FEED YOUR DIY-CRAVINGS!
