Tristate Machinery Dismantlers Forum > WISCONSIN
> Motors and tools
> New
> With Warranty
> Arcair slice utility # 63-991-026
Arcair slice utility # 63-991-026
WELDING EQUIPMENT - SAFETY SUPPLIES AND MORE
ARCAIR SLICE UTILITY PACK # 63-991-026
Complete with Tool Box, Torch, Striker, Collet Extension, Extension Shield, two (2) Clamps, Coupling and Instruction Manual
The SLICE Utility Pack permits you to use the exothermic cutting process to virtually any metallic,non-metallic or composite material. The package has the basic items needed to do a cutting job packed in a rugged tool box. Just supply oxygen and an ignition source and ready to cut.
The Arcair slice cutting system can cut, burn or pierce virtually any metallic, non-metallic or composite material. The system cuts through hard-to-cut materials such as stainless steels, cast iron, aluminium, magnesium plus many other ferrous and non-ferrous metals, even when it is caked with mud, rust or other corrosion. It will cut through slag and refractory materials and can punch through concrete or brick. The Arcair slice is a must for maintenance and repair departments, it can remove headless bolts and frozen pins, cut insulated pipes and ducting, cut through coated structural steel, burn through bridge steel and decking, cut concrete lined pipes, cut through or remove hardfacing from buckets and wear surfaces plus many other tasks. Because the Arcair slice system needs no pre-heat, you can start cutting sooner and finish the job faster.
The Arcair slice system works by feeding oxygen and electrical power through a patented slice exothermic cutting rod, you supply oxygen and a 12 volt battery or welding machine (cc).
The battery gives you fast ignition and portability, the welding machine lets you maintain a continuous arc (up to 200 amps) with conductive materials for a cutting temperature of over 5500 c. Either way, you simply turn on the oxygen and touch the cutting rod to the slice striker or grounded work piece. The cutting rod ignites immediately and continues to burn as long as there is a supply of oxygen, even without current, it produces temperatures hot enough to cut virtually any material.
For Cutting Stainless, Alloy Steels, Cast Iron, Aluminum, Magnesium, Non-Ferrous Metals, Slag, Refractory Materials, Concrete and Brick
Torch, 1/4 In Collet, Torch Shield, 10 Foot 1/4 In ID Oxygen Hose, Striker with 10 Foot Cable, Carrying Case
Exothermic torches improve crew safety by eliminating the need for hazardous secondary gases (like acetylene) which are typically carried in the crew compartment. Also by reducing the overall time to complete a job, crew exposure to external hazards is minimized.
Police SWAT- Forced entry applications
Removing security bars/doors from hardened houses.
Penetrating steel industrial doors.
Cutting hardened padlocks and chains.
Fast, quiet and easy to use.
Bendable cutting rods used with rod extender allow greater use of cover.
Eliminates risk of collateral damage and liability from explosive entries.
Eliminates "they shot first" scenarios of shotgun breaching.
Highly portable. No hazardous acetylene on site.
Remove security bars, doors, grates from commercial and residential structures.
Heavy rescue, i.e. industrial accidents involving heavy machinery (cranes, farm equipment, process equipment, etc.).
Cut structural steel or concrete reinforcement bar.
Cut track rails, frames, aluminum/stainless skin for Railway / Subway accidents.
Lightweight and highly portable.
No acetylene, compressed air or electricity required.
Operates in all weather conditions, through standing water or through water spray.
Cutting rods reach where conventional torches can't.
Cuts thicker material than portable plasma systems.
Cuts aluminum, stainless steel, hardened steel, cast iron, etc.
Cut, gouge, or pierce through any material
Performs in adverse working conditions and damp environments
Professional's first choice for applications involving specialty gouging, piercing or cutting
The unique burning action of Arcair's Exothermic cutting rods literally liquefies any material in its path using the material itself as fuel. Utilizing only oxygen, Arcair rods quickly cut or melt through almost any known material including cast iron, steel, stainless steel, concrete, granite, nickel, titanium and aluminum, as well as exotic metals.Arcair systems cut so quickly there is minimal heat build-up enabling the temper of the material to remain virtually unchanged.
The Exothermic rods burn in damp atmospheres, even when submerged in mud or water.
When saving time is the primary consideration, Arcair is the professional's first choice for applications involving specialty gouging, piercing or cutting. Equipment maintenance and repair shops perform normally difficult and time consuming tasks in just a fraction of the time required by conventional methods. Downtime of expensive heavy equipment is greatly reduce during track and bucket pin removal, gouging and the removal of hard facing and old welds.
Arcair Exothermic systems operate at temperatures exceeding 10,000 degrees F, eliminating the need for surface preheating.
Repairs are made without raising burrs on bearings and bushings because an electrical current is not required.
Arcair's system does not leave carbon deposits eliminating the need for surface grinding and gouge cleaning.
Arcair's systems are safer than other types of equipment because they do not require high amperage or potentially dangerous acetylene (or any other secondary fuel).
Arcair systems produce less noise, smoke and noxious gases than other systems increasing operator comfort and safety.
Arcair user friendly features have been task engineered for simplicity of operation. The 12v DC ignition system, single oxygen fuel source with one regulator, and completely self-contained portable kits ensure that Arcair's Exothermic systems are easy to operate even for less experienced users.
